Smoke coming from the chimneys of factories and other particles attached to the chimney to prevent a lot. Such fine particles are less than 1 mm at about 10μm to be fine, and s easy removal of the body is comparatively large effect on the degree of adversely, it is difficult to remove fine particles. The method of collecting gravity filtration, inertia, centrifugal force, sonic cleaning, etc.
A variety of mechanical and electrical has greatly divided. Our dust filtration technology, dust compared to other facilities that can represent the best dust collection performance in recent years, as the dust collecting technology, process and combustion equipment such as dust generation occurs widely in plant operation is to be applied.

Features

As a representative of the dust collector Bag Filter Dust Collector is a high utilization for the process.
Used to filter out the dust even in general is possible, to separate the differential Bag Filter meal and before installing or using the CYCLONE.
Dust removal efficiency can be up to 99%.
Custom made according to customer’s request can be made.

✽ Product specifications and the size may vary depending on the needs of the buy

Usually referred to as wet scrubbers for the treatment of hazardous gases and chemicals. mist, the gas is washed by bubbles. Attached to the particles, by facilitating the agglomeration of the particles with each other directly separating the particles from the gas flow apparatus. Mainly soluble Gas (NH3, HCl, H2S, etc.), and temperature conditions used in the absorption according to note that the selection of materials according to the collection efficiency of the detailed design is required. In addition, the gas absorption as well as absorption in addition Scrubber Distillation, Hu-midification and Dust, Mist and even the removal of a variety of uses.

Features

High collection efficiency of fine particles of dust processing unnecessary secondary.
High-temperature, high-pressure gas can be treated. (reduced risk of gas explosion)
Dust and gas (especially wet gas) can be processed simultaneously.
Installation cost is cheaper (when not installed waste water treatment), the installation space is small.
Corrosive gases, Mist-exchange can be.
Plugging of Bed and Plates.Interface problems in wet and dry and solidify the waste water treatment.
The pressure loss and the power of the device is high corrosion and erosion.


✽ Product specifications and the size may vary depending on the needs of the buy

Various organic gases and odors absorbing, adsorbing and removing the device Composed of molecular layers on solid surfaces combined with the freedom of the atoms in the chemical composition of the gas by the strong adsorption facility of gas adsorption.
Fluid (Gas) powder is a solid surface (Surface of solid) in contact with the attachment being used Adsorption phenomenon is used, the concentration of gases, liquids or solids to be removed selectively, even if extremely low, because becoming widely utilized.

Features

The greater the specific surface area and affinity for adsorbing effect of the larger.
Absorbent (solid) porous and capillary suction is required for the more solid at the interface is increased.
Adsorption can be used to continue to repeat playback(with 3-5 years of production life of its own maintenance)

Enterprise production activities that occur in the sewage and waste water through the process of biological treatment and physical and chemical, the level of possible discharge treatment system into public sewer and streams.
Our mission is to operate and maintain wastewater treatment plants to produce clean water that meets all regulatory requirements for discharging to waters of the State of Maryland; to utilize the biosolids generated in the treatment process in an environmentally beneficial manner; and to operate and maintain numerous wastewater pumping stations to transport wastewater without overflows.We will accomplish our mission safely, cost effectively, and in a manner that serves our customers well and protects the environment.