LOW PRESSURE PNEUMATIC SYSTEM
Low pressure Pneumatic System
Possible a large amount raw material transport and high-speed conveying




Low-pressure feed Main Components
1. Blower
2. Sifter
3. Cyclone
4. Bin Vent Filter/ Dust Collector
5. Level Sensor
6. Ultra Sonic Level Sensor
7. Screw Conveyor
8. Bag Dumping Station
9. Dense Phase Conveyor
10.Bin Activator
11. Discharger
12. Bulk Bug Feeder
13. Load Cell Weighter
14. Mixer
15. Loading Sprout
Features
Low Pressure System
Low-pressure pumping unit type air transport: Ring Blower Roots Blower or low pressure compressed air using a number of high-speed transport Storage Tank Silo and raw materials that are suitable for transporting device. Low pressure breathing air transport equipment: Ring Blower Roots Blower or a large number of raw materials, using low pressure suction and saved, and saved Silo several meters and Mixer to transport raw materials suitable device.
Low Pressure System
To supply a large amount in a short time. Slow moving speed (8 ~ 15m/min) due to breakage or the shape change of the powder particles is less wear of the feed tube is also very small Tube pressure feed type, separated from each breathing changed according to the surroundings and the raw material is possible.
NOTE
Transport velocity, and the tube diameter ratio is closely related to the difficulty of obtaining theoretical and empirical formula reference. However, the transport distance of the mixing ratio of the pressure drop is proportional to the distance to the road when the mixing ratio needs to be less.Thus, wind speed, pressure drop is calculated by assuming a mixing ratio if you are using ROOTS BLOWER 6000mmAq within the suitability of the wind speed, by changing the mixing ratio should watch the final decision.