Decanter Centrifuge of Mud Treatment System

6. Decanter Centrifuge

Decanter Centrifuge


Decanter Centrifuge separate the suspending fluids using  the principle of centrifugal action, the suspending fluids is pushed into the rotor drum through the inlet pipe and the fluid hole of the spiral feeder.

Under the influence of centrifugal force, solid phase particles are pushed to the internal wall of the drum, then to the nud export of the small end of the drum and excreted. But the fluids is excreted from the overflow hole of the large end.

Such cycle is in order to achieve the purpose of continuous separation.High speed decanting centrifuge are effective for separation.


Drive Principle Mud passing through the Desilter contained in separating fine Cutting
Drive Effect Mud is included in order to reuse as reproducing Barite
Component Bowl, Conveyor, Tube etc.

Specification table of Decanter Centrifuge (Woomin technology)

Model WMDC250 (Fixed)
WMDC200 (Fixed)
WMDC500 (Fixed)
Bowl Diameter 450mm (18inch) 360mm (14inch) 550mm (22inch)
Bowl Length 1100mm (43inch) 1270mm (43inch) 1800mm (43inch)
Max Capacity 250GPM(57m³/h) 200GPM(45m³/h) 500GPM(110m³/h)
Normal Capacity 176GPM(40m³/h) 132GPM(30m³/h) 400GPM(90m³/h)
Bowl speed(Typical) 2200 RPM 3200 RPM 2500 RPM
Bowl speed(VFD) N/A 0 ~ 3200 RPM 0 ~ 2500 RPM
G-Force(Max) 1574 3063 2770
Separation Point 5 ~ 7 Microns 2 ~ 5 Microns 2 ~ 5 Microns
Main Drive 45Kw (60hp) 37Kw (50hp) 90Kw (120hp)
Back Drive 15Kw (20hp) 11Kw (15hp) 37Kw (50hp)


Equipment Series of Mud Treatment System 

Share the Post

About the Author


No comment yet.

Leave a Reply

Your email address will not be published. Required fields are marked *