Shale Shaker of Mud Treatment System

mud shale shaker  shale shaker

1. Shale Shaker

Shale shakers are components of drilling equipment used in many industries, such as coal cleaning, mining, oil and gas drilling.

They are considered to be the first phase of a solids control system on a drilling rig, they are used to remove large solids also called cuttings from the drilling fluid, more commonly called “Mud” due to its similar appearance.

Drilling fluids are integral to the drilling process and, among other functions, serve to lubricate and cool the drill bit as well as convey the drilled cuttings away from the bore hole. These fluids are a mixture of various chemicals in a water or oil based solution and can be very expensive to make.

For both environmental reasons and to reduce the cost of drilling operations, drilling fluid losses are minimized by stripping them away from the drilled cuttings before the cuttings are disposed of.

This is done using a multitude of specialized machines and tanks.

Shale shakers are the primary solids separation tool on a rig. After returning to the surface of the well the used drilling fluid flows directly to the shale shakers where it begins to be processed. Once processed by the shale shakers the drilling fluid is deposited into the mud tanks where other solid control equipment begin to remove the finer solids from it.

The solids removed by the shale shaker are discharged out of the discharge port into a separate holding tank where they await further treatment or disposal.

Shale shakers are considered by most of the drilling industry to be the most important device in the solid control system as the performance of the successive equipment directly relates to the cleanliness of the treated drilling fluid.


Equipment Series of Mud Treatment System 

Share the Post

About the Author


No comment yet.

Leave a Reply

Your email address will not be published. Required fields are marked *